Close gaps before adding insulation
Air can slip between your living space and attic through the hatch, framing joints and openings around pipes or wiring. Attic Squad checks those openings when evaluating insulation upgrades in Pasadena.
Attic air sealing closes unwanted gaps at the ceiling plane, the boundary between conditioned rooms and the attic. Insulation slows heat transfer across that boundary, but it does not reliably stop air from moving through an open chase or a loose hatch. A good plan addresses both problems without closing the vents your attic needs.
Look at these areas first when discussing what belongs in your attic scope.
Attic hatches and pull-down stairs. A cover can look closed and still leak around the edges. Depending on the access design, weatherstripping or a properly fitted insulated cover may improve the seal while keeping the opening usable.
Plumbing, wiring and open chases. Pipes, wires and soffits can leave openings into the attic. Small gaps and larger cavities may need different materials and methods. A ceiling-plane gap around a duct boot is not the same thing as a leak in the duct itself.
Fixtures and vents. Recessed lights and combustion vents can have special clearance and material requirements. Intentional soffit, ridge or roof ventilation must stay open. The inspection helps distinguish a hole to seal from an opening the attic needs.
Start by noting the rooms or hatch where you feel drafts. From the attic side, check access, visible ceiling openings and the condition of existing insulation. Damp material, exposed older wiring or signs of pests may need a different next step first. If a fuel-burning appliance is in the attic, ask a qualified HVAC professional about combustion safety checks after sealing.
Ask for the locations being sealed, which areas are out of reach, and whether the price includes hatch treatment or moving insulation. Ask how the crew will protect ventilation and handle fixtures that need clearance. This ENERGY STAR attic air-sealing guide shows common leak locations you can discuss at the inspection.
(626) 649-3652
© 2026 All Rights Reserved | Attic Squad Insulation